Pack consisting of an adjustable electric bed, a headboard and footboard set, set of side rails and a viscoelastic mattress.
ADJUSTABLE ELECTRIC BED:
Adjustable electric bed with four sections and an electric lift.
The sections are operated electronically, through the compact motor system (IPX4 water resistance).
Electric lift with a scissor system and linear motors (IPX4 water resistance).
Operated by cabled remote control that is easy and intuitive to use and with a rear hook so it can be hung anywhere.
22 double wooden slates made of steamed beech and coated in contact paper, on top of flexible rubber pads, which adapt better to the body and deliver greater durability.
Frame with four 100-mm diameter wheels included, with an individual brake on each.
2 brackets to hold accessories (IV pole, power cable) located in the headboard area. Accessories, sold separately.
HEADBOARD-FOOTBOARD SET:
Headboard-footboard set screwed to the frame
Headboard-footboard with side slats and rails made of beech and a 19-mm central panel made of laminated beech.
SET OF FOLDING SIDE RAILS:
Side rails made of four tubes of painted steel, placed on closed rounded tubular supports, made of injected polyamide.
Each rail has a locking and unlocking system.
Anti-entrapment system, in accordance with the IEC 60601-2-52 standard.
MEDICAL VISCOELASTIC MATTRESS:
Double-layer mattress that combines a base of HR foam (9cm) with a heat-sensitive viscoelastic top layer (5cm).
HR flame-resistant high-density foam (30kg/m3) with a high support factor (3kPa).
Foam with high breathability, achieved through an open-cell manufacturing process.
Single top layer, made of slow-recovery high-density ThermoFoam (50kg/m3).
System of lower channels that make folding easier for bed adjustments.
Protected by a non-inflammable bi-elastic cover made of polyester with a fire-retardant polyurethane coating. Waterproof cover that is breathable for steam, and is anti-bacterial and anti-fungal.
Detachable with a zip, placed on the reverse of the mattress, away from the sides of the mattress to prevent injuries to the patient. Protected by a flap to prevent possible entry of liquids into the mattress.
Width of the bases: 900mm ± 10mm
Reclining back inclination: 72° ± 5°
Inclination angle of ends: 32° ± 2°
Maximum permitted weight (MPW): 140kg
Safe weight limit (SWL): 180kg Bed weight without mattress or accessories: 45kg
Recommended mattress dimensions: 900 x 1,900mm ± 10mm
